UK · EU reference Tyre Pressure

Honda · Partner · PSI

Honda Partner inflation in PSI (35-45 front, 45-65 rear)

Drivetrain
front-wheel drive
Body
light commercial
PSI F / R
35-45 / 45-65
Bar F / R
2.4-3.1 / 3.1-4.5

psi

40 / 55

Catalogue mid-points, front / rear · 2.4-3.1 / 3.1-4.5 bar

35-45 psi F · 45-65 psi R · 2.4-3.1 / 3.1-4.5 bar · 276/379 kPa

If a Partner owner asks “what PSI?”, start at 40 at the steering axle and 55 at the rear, then confirm the placard. A 10 °C overnight drop takes roughly 1 psi (0.07 bar) off a closed Honda tyre.

Honda Partner placard versus sidewall

The tyre-information placard on a Honda Partner sits on the driver’s door pillar (sometimes the fuel-filler flap). Catalogue figures here are a general band: 35-45 / 45-65 psi.

PSI, bar and kPa

PSI-led conversions for the Honda Partner band (35-45 / 45-65).

PSIBarkPa
352.41241
362.48248
382.62262
402.76276
443.03303
453.10310
503.45345
553.79379
604.14414
654.48448

Estimated pressure by tyre size (265/70R17 and others)

If your Honda Partner no longer wears the OEM diameter, start at the row nearest 265/70R17 or 275/65R18 and confirm with the tyre maker’s load table.

Tyre sizeFront PSIRear PSIFront barRear barFront kPaRear kPaNote
265/70R1743602.964.14296414Typical 17-inch load tyre
275/65R1843612.964.21296421Plus-size 18-inch
255/65R1743602.964.14296414Highway 17-inch
LT265/70R1748693.314.76331476LT 17-inch
245/70R1642592.94.07290407Common 16-inch all-terrain
235/75R1541582.834283400Older compact truck
LT245/75R1648673.314.62331462LT-metric, higher load
285/70R1744623.034.27303427Wide all-terrain

How to set the Partner

  1. Measure before the school run, not after the M25.
  2. Write LF / RF / RR / RL. Do not keep Partner numbers in your head.
  3. Add air in short bursts toward 40 psi (2.76 bar) front and 55 psi rear.
  4. If one corner is 4 psi down, hunt for a nail before you blame the weather.
  5. Log date, ambient temperature and the four readings.

Load notes

Load moves the rear of a light commercial first. If the factory placard already has a “laden” column, use that instead of these sketches.

ConditionFront (est.)Rear (est.)
Driver only40 psi / 2.76 bar55 psi / 3.79 bar
Full occupancy40 psi / 2.76 bar56 psi / 3.86 bar
Motorway + luggage41 psi / 2.83 bar57 psi / 3.93 bar

Temperature drift

Roughly 1 psi per 5–6 °C. The table uses 40 psi as a 20 °C baseline for this Partner.

AmbientGauge (front mid)BarkPaNote
−5 °C (hard frost)37 psi2.55 bar255 kPaGauge reads low; do not overfill once warm
0 °C38 psi2.62 bar262 kPaGauge reads low; do not overfill once warm
8 °C (UK winter morning)39 psi2.69 bar269 kPaGauge reads low; do not overfill once warm
20 °C (set cold here)40 psi2.76 bar276 kPaBaseline
30 °C42 psi2.9 bar290 kPaDo not bleed a hot tyre
38 °C (heatwave tarmac)43 psi2.96 bar296 kPaDo not bleed a hot tyre

Honda notes

Honda cars cluster around 32–35 psi (2.2–2.4 bar). Reset the TPMS from the cluster after a large fill on many 2008+ models.

Spare and inflator kit

A matching full-size spare on the Honda Partner usually follows the higher axle (often the rear, near 45-65 psi). A space-saver is commonly 60 psi / 4.1 bar — read that tyre’s own sidewall. An inflator kit is not a spare; check the sealant date.

Keep the Honda Partner on the printed band; use 265/70R17 and 255/65R17 only as a map for non-OEM wheels.

Other Honda models

Questions about this Partner

Should I bleed pressure after a motorway run?

No. Heat raises the gauge. Set cold only. Bleeding a hot tyre leaves it low the next morning.

How often should I check a Partner?

Monthly, before a long trip, and after a 10 °C weather swing. Include a full-size spare.

What is that in bar and kPa for the Partner?

Mid-points are about 2.76 bar (276 kPa) front and 3.79 bar (379 kPa) rear.

What PSI if I plus-size toward 255/65R17?

Keep load index at or above OEM. Low-profile sizes usually stay at or slightly above the placard. Use 265/70R17, 275/65R18 and 255/65R17 as a planning band.

What tyre pressure should a Honda Partner use?

Catalogue reference is 35-45 psi front and 45-65 psi rear (2.4-3.1 / 3.1-4.5 bar), cold. Confirm on the door-pillar placard.

Handbook: placard · bar vs PSI · front vs rear · cold inflation