UK · EU reference Tyre Pressure

Foton · Tunland V9 · Recommended

Official-style tyre pressure for the Foton Tunland V9

Drivetrain
front-wheel drive
Body
light commercial
PSI F / R
35-45 / 45-65
Bar F / R
2.4-3.1 / 3.1-4.5

psi

40 / 55

Catalogue mid-points, front / rear · 2.4-3.1 / 3.1-4.5 bar

35-45 psi F · 45-65 psi R · 2.4-3.1 / 3.1-4.5 bar · 276/379 kPa

Treat this page as a map of the Tunland V9 band. The legal setpoint is the printed door-pillar label for your VIN. Under-inflation cooks the shoulders of a Tunland V9; over-inflation wears the centre rib and bangs every cat’s eye.

How to set the Tunland V9

  1. Park the Foton Tunland V9 for at least three hours (cold tyres).
  2. Use a calibrated gauge, not the only meter on a forecourt hose.
  3. Set the placard for that axle — about 35-45 psi / 2.4-3.1 bar front and 45-65 psi / 3.1-4.5 bar rear on this catalogue row.
  4. Recheck all four. A 2 psi miss on a front-wheel drive Tunland V9 is enough to feel a pull.
  5. Refit valve caps and reset TPMS if the handbook asks for a relearn.

Foton Tunland V9 placard versus sidewall

The tyre-information placard on a Foton Tunland V9 sits on the driver’s door pillar (sometimes the fuel-filler flap). Catalogue figures here are a general band: 35-45 / 45-65 psi.

Estimated pressure by tyre size (LT245/75R16 and others)

Planning cold pressures for sizes often seen on a light commercial. This Tunland V9 sample opens with LT245/75R16, then 245/70R16 and 255/65R17.

Tyre sizeFront PSIRear PSIFront barRear barFront kPaRear kPaNote
LT245/75R1648673.314.62331462LT-metric, higher load
245/70R1642592.94.07290407Common 16-inch all-terrain
255/65R1743602.964.14296414Highway 17-inch
265/70R1743602.964.14296414Typical 17-inch load tyre
285/70R1744623.034.27303427Wide all-terrain
275/65R1843612.964.21296421Plus-size 18-inch
LT265/70R1748693.314.76331476LT 17-inch
235/75R1541582.834283400Older compact truck

PSI, bar and kPa

PSI-led conversions for the Foton Tunland V9 band (35-45 / 45-65).

PSIBarkPa
352.41241
362.48248
382.62262
402.76276
443.03303
453.10310
503.45345
553.79379
604.14414
654.48448

Pressure against load

Load moves the rear of a light commercial first. If the factory placard already has a “laden” column, use that instead of these sketches.

ConditionFront (est.)Rear (est.)
Driver only40 psi / 2.76 bar55 psi / 3.79 bar
Full occupancy41 psi / 2.83 bar57 psi / 3.93 bar
Motorway + luggage42 psi / 2.9 bar57 psi / 3.93 bar

Temperature drift

Roughly 1 psi per 5–6 °C. The table uses 40 psi as a 20 °C baseline for this Tunland V9.

AmbientGauge (front mid)BarkPaNote
−5 °C (hard frost)37 psi2.55 bar255 kPaGauge reads low; do not overfill once warm
0 °C38 psi2.62 bar262 kPaGauge reads low; do not overfill once warm
8 °C (UK winter morning)39 psi2.69 bar269 kPaGauge reads low; do not overfill once warm
20 °C (set cold here)40 psi2.76 bar276 kPaBaseline
30 °C42 psi2.9 bar290 kPaDo not bleed a hot tyre
38 °C (heatwave tarmac)43 psi2.96 bar296 kPaDo not bleed a hot tyre

Foton notes

No special Foton exception: the Tunland V9 uses the door-pillar placard. Size estimates on this page only help if you have left the original load index behind.

Spare and inflator kit

A matching full-size spare on the Foton Tunland V9 usually follows the higher axle (often the rear, near 45-65 psi). A space-saver is commonly 60 psi / 4.1 bar — read that tyre’s own sidewall. An inflator kit is not a spare; check the sealant date.

A cheap gauge and a monthly habit will do more for this Tunland V9 than nitrogen upsells.

Other Foton models

Questions about this Tunland V9

What PSI if I plus-size toward 255/65R17?

Keep load index at or above OEM. Low-profile sizes usually stay at or slightly above the placard. Use LT245/75R16, 245/70R16 and 255/65R17 as a planning band.

How often should I check a Tunland V9?

Monthly, before a long trip, and after a 10 °C weather swing. Include a full-size spare.

When does TPMS warn on a Foton Tunland V9?

Direct TPMS typically flags about 25% below placard — near 30 psi on this row. Fill to the sticker, not to the lamp.

Is the sidewall number correct on a Foton Tunland V9?

No. Sidewall PSI is a maximum. The Tunland V9 placard is the operating target, near 35-45/45-65 psi.

Front versus rear on the Foton Tunland V9?

This row is 35-45 F / 45-65 R. Even when they match, a laden rear can justify a higher number if the sticker prints one.

Handbook: placard · bar vs PSI · front vs rear · cold inflation