UK · EU reference Tyre Pressure

Mercedes-Benz · SLC 43 AMG · Overview

Mercedes-Benz SLC 43 AMG tyre pressure

Drivetrain
rear-wheel drive
Body
passenger car
PSI F / R
32-35 / 32-35
Bar F / R
2.2-2.4 / 2.2-2.4

psi

34 / 34

Catalogue mid-points, front / rear · 2.2-2.4 / 2.2-2.4 bar

32-35 psi F · 32-35 psi R · 2.2-2.4 / 2.2-2.4 bar · 231/231 kPa

This rear-wheel drive passenger car is filed here with a working range of 32-35/32-35 psi. The pillar sticker on your VIN still overrides the website. Under-inflation cooks the shoulders of a SLC 43 AMG; over-inflation wears the centre rib and bangs every cat’s eye.

Temperature and a cold gauge

Roughly 1 psi per 5–6 °C. The table uses 34 psi as a 20 °C baseline for this SLC 43 AMG.

AmbientGauge (front mid)BarkPaNote
−5 °C (hard frost)31 psi2.14 bar214 kPaGauge reads low; do not overfill once warm
0 °C32 psi2.21 bar221 kPaGauge reads low; do not overfill once warm
8 °C (UK winter morning)33 psi2.28 bar228 kPaGauge reads low; do not overfill once warm
20 °C (set cold here)34 psi2.34 bar234 kPaBaseline
30 °C36 psi2.48 bar248 kPaDo not bleed a hot tyre
38 °C (heatwave tarmac)37 psi2.55 bar255 kPaDo not bleed a hot tyre

Estimated pressure by tyre size (225/45R17 and others)

225/45R17 is the first planning size here. 255/40R17 is usually the plus-size or LT step. Keep load index at or above original equipment.

Tyre sizeFront PSIRear PSIFront barRear barFront kPaRear kPaNote
225/45R1734352.342.41234241Front sport size
275/35R1836372.482.55248255Wide rear
255/40R1735362.412.48241248Rear stagger 17-inch
245/40R1835362.412.48241248Square-ish sport
255/35R1835362.412.48241248Rear stagger 18-inch
225/40R1835352.412.41241241Front 18-inch
275/30R1936372.482.55248255Rear 19-inch
235/35R1936362.482.48248248Front 19-inch

Mercedes-Benz notes

Mercedes often lists comfort versus load. Match the table to how the SLC 43 AMG is actually occupied that day.

How to set the SLC 43 AMG

  1. Measure before the school run, not after the M25.
  2. Write LF / RF / RR / RL. Do not keep SLC 43 AMG numbers in your head.
  3. Add air in short bursts toward 34 psi (2.31 bar) front and 34 psi rear.
  4. If one corner is 4 psi down, hunt for a nail before you blame the weather.
  5. Log date, ambient temperature and the four readings.

PSI, bar and kPa

1 bar ≈ 14.5 psi; 1 psi ≈ 6.89 kPa. Mid-points on the SLC 43 AMG: 34 psi = 2.31 bar = 231 kPa.

PSIBarkPa
302.07207
322.21221
332.28228
33.52.31231
352.41241
362.48248
382.62262
402.76276
443.03303
503.45345
604.14414

Mercedes-Benz SLC 43 AMG placard versus sidewall

If the Mercedes-Benz sticker is painted over, the handbook is next. This website is a map, not a replacement VIN label.

Spare and inflator kit

A matching full-size spare on the Mercedes-Benz SLC 43 AMG usually follows the higher axle (often the rear, near 32-35 psi). A space-saver is commonly 60 psi / 4.1 bar — read that tyre’s own sidewall. An inflator kit is not a spare; check the sealant date.

Pressure against load

Load moves the rear of a passenger car first. If the factory placard already has a “laden” column, use that instead of these sketches.

ConditionFront (est.)Rear (est.)
Driver only34 psi / 2.34 bar34 psi / 2.34 bar
Full occupancy35 psi / 2.41 bar36 psi / 2.48 bar
Motorway + luggage36 psi / 2.48 bar37 psi / 2.55 bar

If the Mercedes-Benz sticker and this page disagree, the sticker wins.

Other Mercedes-Benz models

Questions about this SLC 43 AMG

How often should I check a SLC 43 AMG?

Monthly, before a long trip, and after a 10 °C weather swing. Include a full-size spare.

When does TPMS warn on a Mercedes-Benz SLC 43 AMG?

Direct TPMS typically flags about 25% below placard — near 25 psi on this row. Fill to the sticker, not to the lamp.

What PSI if I plus-size toward 255/40R17?

Keep load index at or above OEM. Low-profile sizes usually stay at or slightly above the placard. Use 225/45R17, 275/35R18 and 255/40R17 as a planning band.

Should I bleed pressure after a motorway run?

No. Heat raises the gauge. Set cold only. Bleeding a hot tyre leaves it low the next morning.

Is the sidewall number correct on a Mercedes-Benz SLC 43 AMG?

No. Sidewall PSI is a maximum. The SLC 43 AMG placard is the operating target, near 32-35/32-35 psi.

Handbook: placard · bar vs PSI · front vs rear · cold inflation