UK · EU reference Tyre Pressure

Nissan · Qashqai · Bar

Nissan Qashqai bar chart (2.2-2.4 / 2.2-2.4)

Drivetrain
front-wheel drive
Body
SUV / crossover
PSI F / R
32-35 / 32-35
Bar F / R
2.2-2.4 / 2.2-2.4

bar

2.31 / 2.31

32-35 / 32-35 psi · 231 / 231 kPa

32-35 psi F · 32-35 psi R · 2.2-2.4 / 2.2-2.4 bar · 231/231 kPa

2.3 bar is not 23 psi. On this Qashqai 2.2-2.4 bar converts to about 32-35 psi. Use the table, not a guess. Size estimates on this page include 255/50R20, 215/70R16 and 245/55R19 — interpolated from the catalogue midpoint, not a second factory sticker.

Bar, PSI and kPa

Bar-led conversions around the Nissan Qashqai. 2.2-2.4 bar is not “32-35 divided by ten”.

BarPSIkPa
2.0730207
2.2132221
2.2833228
2.3133.5231
2.4135241
2.4836248
2.6238262
2.7640276
3.0344303
3.4550345
4.1460414

Nissan Qashqai placard versus sidewall

If the Nissan sticker is painted over, the handbook is next. This website is a map, not a replacement VIN label.

Estimated pressure by tyre size (255/50R20 and others)

If your Nissan Qashqai no longer wears the OEM diameter, start at the row nearest 255/50R20 or 215/70R16 and confirm with the tyre maker’s load table.

Tyre sizeFront PSIRear PSIFront barRear barFront kPaRear kPaNote
255/50R2037372.552.5525525520-inch plus-size
215/70R1634342.342.34234234Compact crossover
245/55R1936362.482.48248248Low-profile 19-inch
235/65R1735362.412.48241248Mid-size SUV
225/60R1835352.412.41241241Highway CUV
235/60R1836362.482.48248248Plus-size 18-inch
245/60R1836372.482.55248255Heavier CUV
225/65R1735352.412.41241241Very common 17-inch

Load notes

Load moves the rear of a SUV / crossover first. If the factory placard already has a “laden” column, use that instead of these sketches.

ConditionFront (est.)Rear (est.)
Driver only34 psi / 2.34 bar34 psi / 2.34 bar
Full occupancy35 psi / 2.41 bar36 psi / 2.48 bar
Motorway + luggage36 psi / 2.48 bar36 psi / 2.48 bar

How to set the Qashqai

  1. Park the Nissan Qashqai for at least three hours (cold tyres).
  2. Use a calibrated gauge, not the only meter on a forecourt hose.
  3. Set the placard for that axle — about 32-35 psi / 2.2-2.4 bar front and 32-35 psi / 2.2-2.4 bar rear on this catalogue row.
  4. Recheck all four. A 2 psi miss on a front-wheel drive Qashqai is enough to feel a pull.
  5. Refit valve caps and reset TPMS if the handbook asks for a relearn.

Temperature drift

Roughly 1 psi per 5–6 °C. The table uses 34 psi as a 20 °C baseline for this Qashqai.

AmbientGauge (front mid)BarkPaNote
−5 °C (hard frost)31 psi2.14 bar214 kPaGauge reads low; do not overfill once warm
0 °C32 psi2.21 bar221 kPaGauge reads low; do not overfill once warm
8 °C (UK winter morning)33 psi2.28 bar228 kPaGauge reads low; do not overfill once warm
20 °C (set cold here)34 psi2.34 bar234 kPaBaseline
30 °C36 psi2.48 bar248 kPaDo not bleed a hot tyre
38 °C (heatwave tarmac)37 psi2.55 bar255 kPaDo not bleed a hot tyre

Nissan notes

A Qashqai and a Navara do not share a number. Vans and taxis may sit higher than a family hatch.

Spare and inflator kit

A matching full-size spare on the Nissan Qashqai usually follows the higher axle (often the rear, near 32-35 psi). A space-saver is commonly 60 psi / 4.1 bar — read that tyre’s own sidewall. An inflator kit is not a spare; check the sealant date.

If the Nissan sticker and this page disagree, the sticker wins.

Other Nissan models

Questions about this Qashqai

What is that in bar and kPa for the Qashqai?

Mid-points are about 2.31 bar (231 kPa) front and 2.31 bar (231 kPa) rear.

What PSI if I plus-size toward 245/55R19?

Keep load index at or above OEM. Low-profile sizes usually stay at or slightly above the placard. Use 255/50R20, 215/70R16 and 245/55R19 as a planning band.

How often should I check a Qashqai?

Monthly, before a long trip, and after a 10 °C weather swing. Include a full-size spare.

Front versus rear on the Nissan Qashqai?

This row is 32-35 F / 32-35 R. Even when they match, a laden rear can justify a higher number if the sticker prints one.

What tyre pressure should a Nissan Qashqai use?

Catalogue reference is 32-35 psi front and 32-35 psi rear (2.2-2.4 / 2.2-2.4 bar), cold. Confirm on the door-pillar placard.

Handbook: placard · bar vs PSI · front vs rear · cold inflation