UK · EU reference Tyre Pressure

Ford · Transit Connect · PSI

Ford Transit Connect tyre PSI

Drivetrain
front-wheel drive
Body
van
PSI F / R
35-45 / 45-65
Bar F / R
2.4-3.1 / 3.1-4.5

psi

40 / 55

Catalogue mid-points, front / rear · 2.4-3.1 / 3.1-4.5 bar

35-45 psi F · 45-65 psi R · 2.4-3.1 / 3.1-4.5 bar · 276/379 kPa

A Ford Transit Connect run at sidewall-max (often 44–51 psi) is over-inflated for this van. The operating PSI is 35-45/45-65. A 10 °C overnight drop takes roughly 1 psi (0.07 bar) off a closed Ford tyre. Commercial and load-biased bodies like this van often need a higher rear; LT or C-type sizes such as 225/75R16 are not filled like a Fiesta.

Ford Transit Connect placard versus sidewall

Sidewall PSI is a carcass maximum. Recommended operating pressure for this Transit Connect is the pillar sticker, near 40/55 psi.

PSI, bar and kPa

PSI-led conversions for the Ford Transit Connect band (35-45 / 45-65).

PSIBarkPa
352.41241
362.48248
382.62262
402.76276
443.03303
453.10310
503.45345
553.79379
604.14414
654.48448

Estimated pressure by tyre size (235/60R17 and others)

If your Ford Transit Connect no longer wears the OEM diameter, start at the row nearest 235/60R17 or 195/75R16C and confirm with the tyre maker’s load table.

Tyre sizeFront PSIRear PSIFront barRear barFront kPaRear kPaNote
235/60R1741582.834283400Plus-size van
195/75R16C44633.034.34303434C-type commercial
225/75R1642602.94.14290414Taller load range
215/65R1640572.763.93276393Compact van
215/75R16C45643.14.41310441C-type 215
LT215/85R1646653.174.48317448LT commercial
225/65R1641582.834283400Common transaxle van
235/65R1642592.94.07290407Loaded van

How to set the Transit Connect

  1. Measure before the school run, not after the M25.
  2. Write LF / RF / RR / RL. Do not keep Transit Connect numbers in your head.
  3. Add air in short bursts toward 40 psi (2.76 bar) front and 55 psi rear.
  4. If one corner is 4 psi down, hunt for a nail before you blame the weather.
  5. Log date, ambient temperature and the four readings.

Load notes

Load moves the rear of a van first. If the factory placard already has a “laden” column, use that instead of these sketches.

ConditionFront (est.)Rear (est.)
Driver only40 psi / 2.76 bar55 psi / 3.79 bar
Full occupancy40 psi / 2.76 bar56 psi / 3.86 bar
Payload / towing41 psi / 2.83 bar58 psi / 4 bar

Temperature drift

Roughly 1 psi per 5–6 °C. The table uses 40 psi as a 20 °C baseline for this Transit Connect.

AmbientGauge (front mid)BarkPaNote
−5 °C (hard frost)37 psi2.55 bar255 kPaGauge reads low; do not overfill once warm
0 °C38 psi2.62 bar262 kPaGauge reads low; do not overfill once warm
8 °C (UK winter morning)39 psi2.69 bar269 kPaGauge reads low; do not overfill once warm
20 °C (set cold here)40 psi2.76 bar276 kPaBaseline
30 °C42 psi2.9 bar290 kPaDo not bleed a hot tyre
38 °C (heatwave tarmac)43 psi2.96 bar296 kPaDo not bleed a hot tyre

Ford notes

Ford UK placards on the Transit Connect are often printed in PSI even when the handbook also shows bar. A Mondeo, Focus or Kuga does not share a Transit number. Loaded vans use the second column.

Spare and inflator kit

A matching full-size spare on the Ford Transit Connect usually follows the higher axle (often the rear, near 45-65 psi). A space-saver is commonly 60 psi / 4.1 bar — read that tyre’s own sidewall. An inflator kit is not a spare; check the sealant date.

A cheap gauge and a monthly habit will do more for this Transit Connect than nitrogen upsells.

Other Ford models

Questions about this Transit Connect

What is that in bar and kPa for the Transit Connect?

Mid-points are about 2.76 bar (276 kPa) front and 3.79 bar (379 kPa) rear.

Front versus rear on the Ford Transit Connect?

This row is 35-45 F / 45-65 R. Even when they match, a laden rear can justify a higher number if the sticker prints one.

Should I bleed pressure after a motorway run?

No. Heat raises the gauge. Set cold only. Bleeding a hot tyre leaves it low the next morning.

What PSI if I plus-size toward 225/75R16?

Keep load index at or above OEM. Low-profile sizes usually stay at or slightly above the placard. Use 235/60R17, 195/75R16C and 225/75R16 as a planning band.

What tyre pressure should a Ford Transit Connect use?

Catalogue reference is 35-45 psi front and 45-65 psi rear (2.4-3.1 / 3.1-4.5 bar), cold. Confirm on the door-pillar placard.

Handbook: placard · bar vs PSI · front vs rear · cold inflation