UK · EU reference Tyre Pressure

Mercedes-Benz · GLS 350 · Overview

Mercedes-Benz GLS 350: 2.2-2.4 bar / 32-35 psi

Drivetrain
all-wheel drive
Body
SUV / crossover
PSI F / R
32-35 / 32-35
Bar F / R
2.2-2.4 / 2.2-2.4

psi

34 / 34

Catalogue mid-points, front / rear · 2.2-2.4 / 2.2-2.4 bar

32-35 psi F · 32-35 psi R · 2.2-2.4 / 2.2-2.4 bar · 231/231 kPa

This all-wheel drive SUV / crossover is filed here with a working range of 32-35/32-35 psi. The pillar sticker on your VIN still overrides the website. Size estimates on this page include 225/60R18, 215/70R16 and 245/60R18 — interpolated from the catalogue midpoint, not a second factory sticker. Keep side-to-side spread inside about 2 psi so the all-wheel drive hardware is not working on a radius mismatch.

Estimated pressure by tyre size (225/60R18 and others)

If your Mercedes-Benz GLS 350 no longer wears the OEM diameter, start at the row nearest 225/60R18 or 215/70R16 and confirm with the tyre maker’s load table.

Tyre sizeFront PSIRear PSIFront barRear barFront kPaRear kPaNote
225/60R1835352.412.41241241Highway CUV
215/70R1634342.342.34234234Compact crossover
245/60R1836372.482.55248255Heavier CUV
225/65R1735352.412.41241241Very common 17-inch
245/55R1936362.482.48248248Low-profile 19-inch
235/60R1836362.482.48248248Plus-size 18-inch
235/65R1735362.412.48241248Mid-size SUV
255/50R2037372.552.5525525520-inch plus-size

Spare and inflator kit

A matching full-size spare on the Mercedes-Benz GLS 350 usually follows the higher axle (often the rear, near 32-35 psi). A space-saver is commonly 60 psi / 4.1 bar — read that tyre’s own sidewall. An inflator kit is not a spare; check the sealant date.

Mercedes-Benz notes

Mercedes often lists comfort versus load. Match the table to how the GLS 350 is actually occupied that day.

How to set the GLS 350

  1. Park the Mercedes-Benz GLS 350 for at least three hours (cold tyres).
  2. Use a calibrated gauge, not the only meter on a forecourt hose.
  3. Set the placard for that axle — about 32-35 psi / 2.2-2.4 bar front and 32-35 psi / 2.2-2.4 bar rear on this catalogue row.
  4. Recheck all four. A 2 psi miss on a all-wheel drive GLS 350 is enough to feel a pull.
  5. Refit valve caps and reset TPMS if the handbook asks for a relearn.

Mercedes-Benz GLS 350 placard versus sidewall

Sidewall PSI is a carcass maximum. Recommended operating pressure for this GLS 350 is the pillar sticker, near 34/34 psi.

Pressure against load

Load moves the rear of a SUV / crossover first. If the factory placard already has a “laden” column, use that instead of these sketches.

ConditionFront (est.)Rear (est.)
Driver only34 psi / 2.34 bar34 psi / 2.34 bar
Full occupancy34 psi / 2.34 bar35 psi / 2.41 bar
Motorway + luggage35 psi / 2.41 bar37 psi / 2.55 bar

PSI, bar and kPa

1 bar ≈ 14.5 psi; 1 psi ≈ 6.89 kPa. Mid-points on the GLS 350: 34 psi = 2.31 bar = 231 kPa.

PSIBarkPa
302.07207
322.21221
332.28228
33.52.31231
352.41241
362.48248
382.62262
402.76276
443.03303
503.45345
604.14414

Temperature and a cold gauge

Roughly 1 psi per 5–6 °C. The table uses 34 psi as a 20 °C baseline for this GLS 350.

AmbientGauge (front mid)BarkPaNote
−5 °C (hard frost)31 psi2.14 bar214 kPaGauge reads low; do not overfill once warm
0 °C32 psi2.21 bar221 kPaGauge reads low; do not overfill once warm
8 °C (UK winter morning)33 psi2.28 bar228 kPaGauge reads low; do not overfill once warm
20 °C (set cold here)34 psi2.34 bar234 kPaBaseline
30 °C36 psi2.48 bar248 kPaDo not bleed a hot tyre
38 °C (heatwave tarmac)37 psi2.55 bar255 kPaDo not bleed a hot tyre

Keep the Mercedes-Benz GLS 350 on the printed band; use 225/60R18 and 245/60R18 only as a map for non-OEM wheels.

Other Mercedes-Benz models

Questions about this GLS 350

Is the sidewall number correct on a Mercedes-Benz GLS 350?

No. Sidewall PSI is a maximum. The GLS 350 placard is the operating target, near 32-35/32-35 psi.

Should I bleed pressure after a motorway run?

No. Heat raises the gauge. Set cold only. Bleeding a hot tyre leaves it low the next morning.

What PSI if I plus-size toward 245/60R18?

Keep load index at or above OEM. Low-profile sizes usually stay at or slightly above the placard. Use 225/60R18, 215/70R16 and 245/60R18 as a planning band.

What tyre pressure should a Mercedes-Benz GLS 350 use?

Catalogue reference is 32-35 psi front and 32-35 psi rear (2.2-2.4 / 2.2-2.4 bar), cold. Confirm on the door-pillar placard.

How often should I check a GLS 350?

Monthly, before a long trip, and after a 10 °C weather swing. Include a full-size spare.

Handbook: placard · bar vs PSI · front vs rear · cold inflation