Audi · SQ5 · Bar

Audi SQ5 tyre pressure in bar

Drivetrain: all-wheel drive
Body: SUV / crossover
PSI F / R: 32-35 / 32-35
Bar F / R: 2.2-2.4 / 2.2-2.4

bar

2.31 / 2.31

32-35 / 32-35 psi · 231 / 231 kPa

32-35 psi F · 32-35 psi R · 2.2-2.4 / 2.2-2.4 bar · 231/231 kPa

2.3 bar is not 23 psi. On this SQ5 2.2-2.4 bar converts to about 32-35 psi. Use the table, not a guess. Size estimates on this page include 215/70R16, 225/60R18 and 225/65R17 — interpolated from the catalogue midpoint, not a second factory sticker. Keep side-to-side spread inside about 2 psi so the all-wheel drive hardware is not working on a radius mismatch.

Bar, PSI and kPa

Bar-led conversions around the Audi SQ5. 2.2-2.4 bar is not “32-35 divided by ten”.

Bar	PSI	kPa
2.07	30	207
2.21	32	221
2.28	33	228
2.31	33.5	231
2.41	35	241
2.48	36	248
2.62	38	262
2.76	40	276
3.03	44	303
3.45	50	345
4.14	60	414

Audi SQ5 placard versus sidewall

If the Audi sticker is painted over, the handbook is next. This website is a map, not a replacement VIN label.

Estimated pressure by tyre size (215/70R16 and others)

215/70R16 is the first planning size here. 225/65R17 is usually the plus-size or LT step. Keep load index at or above original equipment.

Tyre size	Front PSI	Rear PSI	Front bar	Rear bar	Front kPa	Rear kPa	Note
215/70R16	34	34	2.34	2.34	234	234	Compact crossover
225/60R18	35	35	2.41	2.41	241	241	Highway CUV
225/65R17	35	35	2.41	2.41	241	241	Very common 17-inch
235/60R18	36	36	2.48	2.48	248	248	Plus-size 18-inch
245/60R18	36	37	2.48	2.55	248	255	Heavier CUV
245/55R19	36	36	2.48	2.48	248	248	Low-profile 19-inch
255/50R20	37	37	2.55	2.55	255	255	20-inch plus-size
235/65R17	35	36	2.41	2.48	241	248	Mid-size SUV

Load notes

Load moves the rear of a SUV / crossover first. If the factory placard already has a “laden” column, use that instead of these sketches.

Condition	Front (est.)	Rear (est.)
Driver only	34 psi / 2.34 bar	34 psi / 2.34 bar
Full occupancy	35 psi / 2.41 bar	36 psi / 2.48 bar
Motorway + luggage	36 psi / 2.48 bar	36 psi / 2.48 bar

How to set the SQ5

Park the Audi SQ5 for at least three hours (cold tyres).
Use a calibrated gauge, not the only meter on a forecourt hose.
Set the placard for that axle — about 32-35 psi / 2.2-2.4 bar front and 32-35 psi / 2.2-2.4 bar rear on this catalogue row.
Recheck all four. A 2 psi miss on a all-wheel drive SQ5 is enough to feel a pull.
Refit valve caps and reset TPMS if the handbook asks for a relearn.

Temperature drift

Roughly 1 psi per 5–6 °C. The table uses 34 psi as a 20 °C baseline for this SQ5.

Ambient	Gauge (front mid)	Bar	kPa	Note
−5 °C (hard frost)	31 psi	2.14 bar	214 kPa	Gauge reads low; do not overfill once warm
0 °C	32 psi	2.21 bar	221 kPa	Gauge reads low; do not overfill once warm
8 °C (UK winter morning)	33 psi	2.28 bar	228 kPa	Gauge reads low; do not overfill once warm
20 °C (set cold here)	34 psi	2.34 bar	234 kPa	Baseline
30 °C	36 psi	2.48 bar	248 kPa	Do not bleed a hot tyre
38 °C (heatwave tarmac)	37 psi	2.55 bar	255 kPa	Do not bleed a hot tyre

Audi notes

No special Audi exception: the SQ5 uses the door-pillar placard. Size estimates on this page only help if you have left the original load index behind.

Spare and inflator kit

A matching full-size spare on the Audi SQ5 usually follows the higher axle (often the rear, near 32-35 psi). A space-saver is commonly 60 psi / 4.1 bar — read that tyre’s own sidewall. An inflator kit is not a spare; check the sealant date.

If the Audi sticker and this page disagree, the sticker wins.

Other Audi models

A6 allroad A6 e-tron 100 Coupe A2 e-tron GT 50 A4 allroad

Questions about this SQ5

What PSI if I plus-size toward 225/65R17?

Keep load index at or above OEM. Low-profile sizes usually stay at or slightly above the placard. Use 215/70R16, 225/60R18 and 225/65R17 as a planning band.

What tyre pressure should a Audi SQ5 use?

Catalogue reference is 32-35 psi front and 32-35 psi rear (2.2-2.4 / 2.2-2.4 bar), cold. Confirm on the door-pillar placard.

Is the sidewall number correct on a Audi SQ5?

No. Sidewall PSI is a maximum. The SQ5 placard is the operating target, near 32-35/32-35 psi.

What is that in bar and kPa for the SQ5?

Mid-points are about 2.31 bar (231 kPa) front and 2.31 bar (231 kPa) rear.

When does TPMS warn on a Audi SQ5?

Direct TPMS typically flags about 25% below placard — near 25 psi on this row. Fill to the sticker, not to the lamp.

Handbook: placard · bar vs PSI · front vs rear · cold inflation