UK · EU reference Tyre Pressure

Audi · Q8 e-tron · PSI

Audi Q8 e-tron inflation in PSI (32-35 front, 32-35 rear)

Drivetrain
all-wheel drive
Body
SUV / crossover
PSI F / R
32-35 / 32-35
Bar F / R
2.2-2.4 / 2.2-2.4

psi

34 / 34

Catalogue mid-points, front / rear · 2.2-2.4 / 2.2-2.4 bar

32-35 psi F · 32-35 psi R · 2.2-2.4 / 2.2-2.4 bar · 231/231 kPa

A Audi Q8 e-tron run at sidewall-max (often 44–51 psi) is over-inflated for this SUV / crossover. The operating PSI is 32-35/32-35. Under-inflation cooks the shoulders of a Q8 e-tron; over-inflation wears the centre rib and bangs every cat’s eye. Battery mass on this {make} {model} makes a 4 psi-low tyre cost range as well as heat.

Audi Q8 e-tron placard versus sidewall

Sidewall PSI is a carcass maximum. Recommended operating pressure for this Q8 e-tron is the pillar sticker, near 34/34 psi.

PSI, bar and kPa

PSI-led conversions for the Audi Q8 e-tron band (32-35 / 32-35).

PSIBarkPa
302.07207
322.21221
332.28228
33.52.31231
352.41241
362.48248
382.62262
402.76276
443.03303
503.45345
604.14414

Estimated pressure by tyre size (215/70R16 and others)

215/70R16 is the first planning size here. 255/50R20 is usually the plus-size or LT step. Keep load index at or above original equipment.

Tyre sizeFront PSIRear PSIFront barRear barFront kPaRear kPaNote
215/70R1634342.342.34234234Compact crossover
245/55R1936362.482.48248248Low-profile 19-inch
255/50R2037372.552.5525525520-inch plus-size
225/65R1735352.412.41241241Very common 17-inch
235/60R1836362.482.48248248Plus-size 18-inch
235/65R1735362.412.48241248Mid-size SUV
225/60R1835352.412.41241241Highway CUV
245/60R1836372.482.55248255Heavier CUV

How to set the Q8 e-tron

  1. Measure before the school run, not after the M25.
  2. Write LF / RF / RR / RL. Do not keep Q8 e-tron numbers in your head.
  3. Add air in short bursts toward 34 psi (2.31 bar) front and 34 psi rear.
  4. If one corner is 4 psi down, hunt for a nail before you blame the weather.
  5. Log date, ambient temperature and the four readings.

Load notes

Load moves the rear of a SUV / crossover first. If the factory placard already has a “laden” column, use that instead of these sketches.

ConditionFront (est.)Rear (est.)
Driver only34 psi / 2.34 bar34 psi / 2.34 bar
Full occupancy34 psi / 2.34 bar35 psi / 2.41 bar
Motorway + luggage35 psi / 2.41 bar37 psi / 2.55 bar

Temperature drift

Roughly 1 psi per 5–6 °C. The table uses 34 psi as a 20 °C baseline for this Q8 e-tron.

AmbientGauge (front mid)BarkPaNote
−5 °C (hard frost)31 psi2.14 bar214 kPaGauge reads low; do not overfill once warm
0 °C32 psi2.21 bar221 kPaGauge reads low; do not overfill once warm
8 °C (UK winter morning)33 psi2.28 bar228 kPaGauge reads low; do not overfill once warm
20 °C (set cold here)34 psi2.34 bar234 kPaBaseline
30 °C36 psi2.48 bar248 kPaDo not bleed a hot tyre
38 °C (heatwave tarmac)37 psi2.55 bar255 kPaDo not bleed a hot tyre

Audi notes

No special Audi exception: the Q8 e-tron uses the door-pillar placard. Size estimates on this page only help if you have left the original load index behind.

Spare and inflator kit

A matching full-size spare on the Audi Q8 e-tron usually follows the higher axle (often the rear, near 32-35 psi). A space-saver is commonly 60 psi / 4.1 bar — read that tyre’s own sidewall. An inflator kit is not a spare; check the sealant date.

Keep the Audi Q8 e-tron on the printed band; use 215/70R16 and 255/50R20 only as a map for non-OEM wheels.

Other Audi models

Questions about this Q8 e-tron

How often should I check a Q8 e-tron?

Monthly, before a long trip, and after a 10 °C weather swing. Include a full-size spare.

Front versus rear on the Audi Q8 e-tron?

This row is 32-35 F / 32-35 R. Even when they match, a laden rear can justify a higher number if the sticker prints one.

What PSI if I plus-size toward 255/50R20?

Keep load index at or above OEM. Low-profile sizes usually stay at or slightly above the placard. Use 215/70R16, 245/55R19 and 255/50R20 as a planning band.

When does TPMS warn on a Audi Q8 e-tron?

Direct TPMS typically flags about 25% below placard — near 25 psi on this row. Fill to the sticker, not to the lamp.

Is the sidewall number correct on a Audi Q8 e-tron?

No. Sidewall PSI is a maximum. The Q8 e-tron placard is the operating target, near 32-35/32-35 psi.

Handbook: placard · bar vs PSI · front vs rear · cold inflation